- 이전글FLVKyebsNDItC
- 다음글wUugXSdmIh
관련 글 보기
-
jzkNLloUZgazOw
hfkezcx
2014-02-17
-
빨간색 플랫 구입했어요. 넘넘 예뻐용
김정은
2013-09-25
댓글목록
작성자 L9j3
작성일 2015-04-28
평점
http://www.ecpur.com/itm/2220.html
This is hot products CO2 Laser engraver and cutter gadget reinforce Engrave and Cut for non-metal, such as rubber,ox horns, wood, plexiglass, atomic materials, crystal, bowlder, etc...
http://www.ecpur.com/images/40w-laser-engraving/laser-engraving-cutting_6.jpg
http://www.ecpur.com/images/40w-laser-engraving/laser-engraving-cutting_7.jpg
http://www.ecpur.com/images/40w-laser-engraving/laser-engraving-cutting_10.jpg
You can handily to use this make over the extent of cutting wood, plexiglass, making models.
carving rubber stamp ,carving wood dog nickname
Laser Type : CO2 Gas
Laser Power : 40W
Tube Trigger Volt : 20KV
Tube Operating Volt : 15KV
Current : 0-22mA
Interface to Computer : USB Port
Maximum Item Size to Engrave : 320mm * 220mm * 70mm (12.6W * 8.7L * 2.8H in )
Laser Tube (life hours) : 1100-1400 Hours
Engraving Speed : 0-350mm/s (0-13.8 in./s )
Cutting Speed : 0-35mm/s (0-1.38 in./s)
Minimum Shaping Character : 1mm * 1mm (0.04 X0.04in )
Resolution Ratio : 0.026mm (0.001 in ) / (1000dpi)
Resetting Positioning : ≤0.01mm (0.0004 in )
Motor Type : Stepper Motor
Software Supported : CorelDraw X4 and MoshiDraw 2013
Power Consumption : ≤250W
Operating Temperature : 0-45℃
Graphic Format Supported : .PLT / .DXF / .BMP / .JPG / .GIF / .PGN / .TIF etc..
Water Cooling : Water Pump include
Product Dimensions : 800mm * 500mm * 250mm (31.4in * 19.6in * 9.8in.)
Recommended Leisure Parts / Consumables Laser Tube, Centred lens, Cogitation lens
*Co2 lasers will sign plain metals when coated with a metal marking solution.
LMM Coated Metals are metals that from been sprayed with an LMM or Laser Marking Material Spray. Typically a CO2 laser engraver like the a person sold here determination not imprint on metals unless it is painted metal. However, LMM sprays have in the offing recently been introduced to the bazaar and if cast-off correctly, drive sanction a CO2 laser engraver to etch on tons types of metal. We do not rep LMM disperse but you can boon it on the internet. However, we dont pledge LLM floral arrangement resolve situation as we do not fabricator it. It would be up to you to learn how to take advantage of it. We do not up returns on this point an eye to the fitting of it did not etch on metal.
CO2 Laser engraver and cutter machine is tempered to as a service to engraving or wounding of non-metal materials: such as rubber,ox horns, wood, plexiglass, atomic materials, crystal, bowlder, etc... Sarcastic thickness: 0-10mm (depends on different materials)
작성자 ZChurchill6o1
작성일 2015-07-08
평점
http://www.ecpur.com/itm/2220.html
This is hot products CO2 Laser engraver and cutter gizmo funding Stamp and Edit after non-metal, such as rubber,ox horns, wood, plexiglass, atomic materials, crystal, bowlder, etc...
http://www.ecpur.com/images/large/40w-laser-engraving/laser-engraving-cutting_6.jpg
http://www.ecpur.com/images/large/40w-laser-engraving/laser-engraving-cutting_7.jpg
http://www.ecpur.com/images/large/40w-laser-engraving/laser-engraving-cutting_10.jpg
You can handily to capitalize on this make over the extent of penetrating wood, plexiglass, making models.
carving rubber mark ,carving wood dog moniker
Laser Type : CO2 Gas
Laser Power : 40W
Tube Trigger Volt : 20KV
Tube Operating Volt : 15KV
Current : 0-22mA
Interface to Computer : USB Port
Maximum Item Size to Engrave : 320mm * 220mm * 70mm (12.6W * 8.7L * 2.8H in )
Laser Tube (life hours) : 1100-1400 Hours
Engraving Speed : 0-350mm/s (0-13.8 in./s )
Cutting Speed : 0-35mm/s (0-1.38 in./s)
Minimum Shaping Character : 1mm * 1mm (0.04 X0.04in )
Resolution Ratio : 0.026mm (0.001 in ) / (1000dpi)
Resetting Positioning : ≤0.01mm (0.0004 in )
Motor Type : Stepper Motor
Software Supported : CorelDraw X4 and MoshiDraw 2013
Power Consumption : ≤250W
Operating Temperature : 0-45℃
Graphic Format Supported : .PLT / .DXF / .BMP / .JPG / .GIF / .PGN / .TIF etc..
Water Cooling : Water Pump include
Product Dimensions : 800mm * 500mm * 250mm (31.4in * 19.6in * 9.8in.)
Recommended Spare Parts / Consumables Laser Tube, Centred lens, Reflection lens
*Co2 lasers will mark undisguised metals when coated with a metal marking solution.
LMM Coated Metals are metals that from been sprayed with an LMM or Laser Marking Documents Spray. Typically a CO2 laser engraver like the anecdote sold here will not engrave on metals unless it is painted metal. However, LMM sprays be struck by recently been introduced to the make available and if used correctly, drive enable a CO2 laser engraver to etch on assorted types of metal. We do not rep LMM circulate but you can find it on the internet. However, we dont certain LLM spray desire situation as we do not industrialist it. It would be up to you to learn how to take advantage of it. We do not receive returns on this component an eye to the reason of it did not impress on metal.
CO2 Laser engraver and cutter contraption is tempered to notwithstanding wood or cutting of non-metal materials: such as rubber,ox horns, wood, plexiglass, atomic materials, crystal, bowlder, etc... Sarcastic thickness: 0-10mm (depends on odd materials)